Full Boar FBWDV-40PTU, Instruction Manual

Page: 7 / 11

12 13
Floor tool (21):
The floor tool (21) is for vacuuming solids and liquids over
medium to large areas (fig. 16).
Crevice tool (20):
The crevice tool (20) is designed for vacuuming solids and
liquids in corners, edges and other areas that are difficult to
access (fig. 17).
Upholstery tool (22):
The upholstery tool (22) is specially designed for vacuuming
solids on upholstery and carpets (fig. 18).
SUCTION TOOLS
Fig. 16
Fig. 17
Fig. 18
OPERATION
This vacuum must be used with a residual current device
with a rated residual current of 30mA or less.
ON/OFF/AUTO switch (3) (fig. 19)
Switch position 0: Off
Switch position I: Normal operation
Switch position AUTO: Automatic mode
Dry vacuuming (fig. 20 & 21)
Use the pleated filter (24) for dry vacuuming (see
Fitting the
pleated filter ).
The dust bag (26) can also be fitted for removal of particularly
heavy dirt (see
Fitting the dust bag
).
Always ensure that the filters are perfectly secure.
Wet vacuuming (fig. 22)
For wet-vacuuming, use the foam filter (27), (see Fitting the
foam filter
).
Check that the filter is securely fitted at all times.
Water drain outlet (10)
To make the tank (8) easier to empty after wet vacuuming, it is
fitted with a water drain outlet (10).
Open the water drain outlet (10) by turning it anti-clockwise
(fig. 23) and drain the liquid.
AUTO
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
IMPORTANT! When wet vacuuming, the floating safety valve (14) turns off the wet
and dry vacuum cleaner automatically when the maximum level is reached.
IMPORTANT! The wet and dry vacuum cleaner is not suitable for the vacuuming of
combustible liquids. For wet vacuuming, use only the supplied foam filter.