Full Boar FBWDV-40PTU, Instruction Manual

Page: 3 / 11

4 5
SPECIFICATIONS....................................................... Page 02
KNOW YOUR PRODUCT........................................... Page 02
INTRODUCTION........................................................ Page 05
SAFETY INSTRUCTIONS........................................... Page 05
ASSEMBLY.................................................................. Page 09
SUCTION TOOLS....................................................... Page 12
OPERATION............................................................... Page 13
MAINTENANCE......................................................... Page 15
DESCRIPTION OF SYMBOLS..................................... Page 16
CONTENTS................................................................ Page 17
WARRANTY................................................................ Page 20
TABLE OF CONTENTS INTRODUCTION
WARNING! When using mains-powered equipment, basic safety precautions,
including the following, should always be followed to reduce risk of fire, electric
shock, personal injury and material damage.
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
Read and understand the manual prior to operating this appliance.
Save these instructions and other documents supplied with this appliance for future
reference.
Congratulations on purchasing a Full Boar wet and
dry vac.
It has been designed for wet and dry vacuuming using
the appropriate filter. The appliance is not suitable for
the vacuuming of combustible, explosive or harmful
substances.
Read the whole manual carefully and make sure you know how to switch the appliance off in
an emergency, before operating.
Save these instructions and other documents supplied with this appliance for future
reference.
Before you connect the equipment to the mains supply make sure that the data on the rating
plate is identical to the mains data.
If the supply cord is damaged, it must be replaced by an electrician or an appliance service
centre, in order to avoid a hazard.
Using an extension lead
Always use an approved extension lead suitable for the power input of this appliance. Before
use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension
lead if damaged or defective. When using an extension lead on a reel, always unwind the
lead completely. Use of an extension lead not suitable for the power input of the appliance,
or which is damaged or defective may result in a risk of fire and electric shock.