10
KNOW YOUR PRODUCT
CAUTION:
Laser radiation.
Do not look into the beam!
Laser class 2
The light/laser radiation used in the Full Boar Radial Tile Cutting Machine FBT-8800 laser is
lass 2 with maximum 1mW and 650nm wavelengths. These lasers do not normally present
an optical hazard, although staring at the beam may cause flash blindness.
• The laser shall be used and maintained in accordance with the manufacturer’s
instructions.
• Never aim the beam at any person or an object other than the work piece.
• The laser beam shall not be deliberately aimed at personnel and shall be prevented from
being directed towards the eye of a person for longer than 0.25s.
• Always ensure the laser beam is aimed at a sturdy work piece without reflective surface’,
i.e. wood or rough coated surfaces are acceptable. Bright shiny reflective sheet steel or
the like is not suitable for laser use as the reflective surface could direct the beam back
at the operator.
• Do not change the laser light assembly with a different type. Repairs must only be
carried out by a power tool repairer.
LASER SAFETY WARNINGS
WARNING!:
Do not stare directly at the laser beam. A hazard may exist if you
deliberately stare into the beam. Please observe all rules as follows:
CAUTION:
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure. Please refer
to the relevant Australian standards, IEC 60825-1:2011 and IEC 60825-14:2011 for
more information on Lasers.
