8
ASSEMBLY
Hooks
Fitting the handle assembly (2)
1.
Unfold the handle assembly (2). (fig. 1)
2.
Mount the handle assembly (2) to the
engine deck (6). Ensure the handle assembly
(2) ends slot into the engine deck (12)
channels. Place M10 x 65 bolts & washer
(18) on the outer side, and tighten with
nyloc nuts on the inner side. (fig. 2)
3.
Using bolt and washer from throttle (1)
attached and secure the throttle (1) onto the
handle assembly (2). (fig. 3)
Hooks
Fig. 3
Hooks
Fig. 2
Fig. 1
