16
17
11.
Battery test results includes five types as follows (fig. 18):
- Battery good
- Battery good, recharge battery
- Battery is bad, replace battery
- Bad battery cell, replace battery
- Battery is weak, charge battery & retest.
OPERATION (cont.)
Health: 100% 530A
Charge: 81% 12.49V
Internal R= 5.55mΩ
Rated: 480A CCA
GOOD BATTERY
Health: 78% 440CCA
Charge: 30% 12.20V
Internal R=7.2mΩ
Rated: 500A
GOOD RECHARGE
Health: 46% 490CCA
Charge: 80% 12.68V
Internal R=18.1mΩ
Rated: 500A
REPLACE
Health: 0% 0CCA
Charge: 20% 10.64V
Internal R=45.2mΩ
Rated: 500A
BAD CELL REPLACE
Health: 39% 310CCA
Charge: 20% 12.08V
Internal R=30.1mΩ
Rated: 500A
CHARGE RETEST
Battery Test
Fig. 18
Cranking test
With the battery terminal clamps correctly connected and before having your
assistant start the engine, turn off all vehicle accessory loads such as lights, air
conditioning, radio etc.
1.
From the Main Menu, using the up button
(8) and down buttons (6) select Cranking
Test (fig. 19) and press enter button (7) to
begin the test.
2.
Select voltage for battery, for vehicles with
a single 12V battery, select 12V. For vehicles
that run with two 12V batteries connected
in series, select 24V (fig. 20).
3.
Have your assistant start the engine when
prompted (fig. 21).
OPERATION (cont.)
Main Menu
1. Battery Test
2. Cranking Test
3. Charging Test
4. Review Data
5. Print
6. System Setup
Cranking Test
Start Engine
Cranking Test
RPM Detected
Cranking Test
Time 780ms
Voltage 9.12V
Cranking Test
CRANKING LOW
Time 780ms
Voltage 10.13V
CRANKING NORMAL
Fig. 19
Cranking Test
1. 12V
2. 24V
Fig. 20
WARNING!
This battery tester is only for 12V batteries, do not use with
batteries that are not listed in specifications.
Main Menu
1. Battery Test
2. Cranking Test
3. Charging Test
4. Review Data
5. Print
6. System Setup
Cranking Test
Start Engine
Cranking Test
RPM Detected
Cranking Test
Time 780ms
Voltage 9.12V
Cranking Test
CRANKING LOW
Time 780ms
Voltage 10.13V
CRANKING NORMAL
Fig. 21
