26
Note:
TB Imports will not be responsible for any damage or injuries caused by the
repair of the tool by an unauthorised person or by mishandling of the tool.
MAINTENANCE
WARNING!
Before cleaning the appliance make sure that it is
disconnected from the vehicle.
Cleaning
• We recommend that you clean the device immediately each time you have
finished using it.
• Keep the device dry, clean and free from oil, water and grease.
• Clean the device regularly with a cloth. Do not use cleaning agents or solvents;
these may be aggressive to the plastic parts in the device. Ensure that no water
can get into the interior of the device.
Storage
• The device should be placed in a dry room for storage.
TROUBLESHOOTING (cont.)
Cannot use the diagnostic function
When you select the Diagnostic OBD/EOBD interface in the home screen, it only
shows the I/M Readiness status, the scan tool may be in Ready test mode. You will
need to do the following:
1.
From the home screen, select Scan tool mode in the Setup interface.