12
OPERATION
WARNING!
Do not connect or disconnect scan tool with ignition on or
engine running.
Setup menu
1.
Connect OBD2 16-pin connector (6) into the DLC.
2.
Turn the ignition on. Setup can be done
with engine off or engine running. When
the scan tool is powered on, it displays a
home screen (fig. 3)
3.
From the home screen, press the Scroll
button (7) to select the Setup interface,
and press Enter/Exit button (5). Follow
the instructions to make adjustments and
settings as described in the following setup
options.
• Language:
The default language from the
factory is English, many other languages can
be manually selected.
1.
From the Tool Setup screen (fig. 4), use the
Scroll button (7) to select Language and
press the Enter/Exit button (5).
2.
From Language screen, use the Scroll
button (7) to select the desired language
(fig. 5).
3.
Press the Enter/Exit button (5) to save your
selection and return to previous menu.
OBD/EOBD
Ready Test
Setup
About
CHECK
Tool Setup
1/6
Language
Unit of measure
Key Beep Set
Status Beep Set
Fn key set
Previous Menu
Language
1/8
Nederlands
English
Francais
Espanol
Deutsch
Unit of Measure
1/2
Metric
English
Key Beep Set
1/2
OFF
ON
Status Beep Set
1/2
OFF
ON
Fn Key Set
1/4
Usual Datastream
All Datastream
I/M Readiness
Read Codes
Fig. 3
OBD/EOBD
Ready Test
Setup
About
CHECK
Tool Setup
1/6
Language
Unit of measure
Key Beep Set
Status Beep Set
Fn key set
Previous Menu
Language
1/8
Nederlands
English
Francais
Espanol
Deutsch
Unit of Measure
1/2
Metric
English
Key Beep Set
1/2
OFF
ON
Status Beep Set
1/2
OFF
ON
Fn Key Set
1/4
Usual Datastream
All Datastream
I/M Readiness
Read Codes
Fig. 4
OBD/EOBD
Ready Test
Setup
About
CHECK
Tool Setup
1/6
Language
Unit of measure
Key Beep Set
Status Beep Set
Fn key set
Previous Menu
Language
1/8
Nederlands
English
Francais
Espanol
Deutsch
Unit of Measure
1/2
Metric
English
Key Beep Set
1/2
OFF
ON
Status Beep Set
1/2
OFF
ON
Fn Key Set
1/4
Usual Datastream
All Datastream
I/M Readiness
Read Codes
Fig. 5