ENGLISH
Use & Care Manual
15
Time Oven Mode Operation
In double oven models, both ovens can be set
independently to operate a timed mode.
Be sure that the time-of-day clock is displaying the
correct time.
The timed mode turns off the oven at the end of the
cook time.
To Set a Timed Mode
1. Select the oven by means of [UPPER/LOWER]
key, if necessary.
2. Select the cooking mode and the temperature by
means of the knobs. The
“ON”
writing will appear in
the display.
3. Touch [TIME] key until the
“TIME”
writings will
appear in the display.
4. Touch [INC] or [DEC], the hour digits will begin
flashing. Continue to set the desired cooking time.
Keep in mind that the time required for the oven to
reach the temperature must be included in the set
cooking time.
5. Touch [TIME] again, the hours will be confirmed
and the minute digits will begin flashing.
6. Touch [INC] or [DEC] to change the minutes. Hold
the key to change by 10 minutes steps. Continue to
set the desired cooking time.
7. Touch [TIME] once again or wait for a few seconds
to confirm the cooking time value.
To Delay the Start of a Timed Mode
Follow steps 1 through 6 or 7 above.
Touch [TIME] key until
“STOP TIME”
will appear in
the display.
The control automatically calculates and display
s
the
initial value, adding the cooking time already set to
the time of day.
Touch [INC] or [DEC], the hour digits will begin
flashing. Continue to set the desired stop time.
Touch [TIME] again, the hours will be confirmed
and the minute digits will begin flashing.
Touch [INC] or [DEC] to change the minutes. Hold
the key to change by 10 minutes steps. Continue
to set the desired stop time.
Touch [TIME] once again or wait for a few
seconds to confirm the stop time value.
The clock automatically calculates the time of day
at which the mode starts and stops. The “DELAY”
writing is displayed until the starting time is
reached.
When a Timed Mode is running
As soon as the oven actually starts cooking, the
display shows the cooking time and counts down
by one minute steps. The oven will cook for the
programmed time.
When the time expires, the oven automatically
turns off, the writings
“ON”
and
“TIME
” start
flashing and an “end of activity” beep sequence
sounds. Reminder beeps will sound for up to
fifteen minutes until any key is touched in order to
recall the user attention.
How to check a time value
Whenever it’s necessary to check a time value
that is not displayed, touch the [TIME] key until the
proper writing is displayed to view the desired
value for 5 seconds.
Example: if the timer value is displayed and you
want to check the cooking time, touch the [TIME]
key until
“TIME”
is displayed to view the cooking
time for 5 seconds.
Selecting the Oven Mode
Setting Cooking Mode and Temperature
The following modes can be selected by moving the
cooking mode knob to the desired position. To
select Clean, the temperature knob must be moved
into the appropriate Clean position too.
OFF
CONVECTION BAKE (CONV BAKE)
CONVECTION BROIL (CONV BROIL)
CONVECTION ROAST (CONV ROAST)
PIZZA (
MULTI
PIZZA)
BAKE (BAKE)
BROIL (BROIL)
DEHYDRATE(CONV DEHY)
PROOF (WARM)
DEFROST (CONV)
WARMING (WARM PLUS)
CLEAN
Select the desired temperature
by
moving the selector
or leave it in the PRESET position if the proposed
value is fine. The temperature can be changed by
5°F or 5°C steps.
As soon as one of the knobs is moved, the control
switches automatically to display the value in the
correspond
ing
cavity. The corresponding writing
“UPPER”
or
“LOWER”
appears.
Cavity will begin to heat, the
“ON”
writing is
displayed when the selected oven is active, oven
lights will turn on.
“PREHEAT”
writing will turn on. Once the oven has
preheated, it will beep and switch the writing off.
To change the temperature while cooking, simply
turn the temperature knob until the display shows
the desired value.
Touch [UPPER/LOWER] to select the desired cavity
and check the related temperature or time values,
even is there’s no need to change those.
Move the cooking mode selector to OFF if you
intend to stop cooking.
The triangles in the upper right corner of the display
are active when a cavity is running, even if it is not
selected on the display.
Using [OPTIONS] key to select low
temperature functions
DEHYDRATE (CONV DEHY)
PROOF (WARM)
DEFROST (CONV)
WARMING (WARM PLUS)
Touch [OPTIONS] key to toggle between these
four modes.
The last used is kept in memory for the next
selection.
Using Oven Lights
A single light key activates the lights in either
oven.
If [LIGHT] key is touched when both ovens are off,
lights in both the upper and lower oven will turn
on. Touch [LIGHT] key again, and both oven lights
will turn off.
Oven lights turn on and off automatically when the
door is opened and closed.
When an oven is in use, oven lights turn on
automatically when a mode is started. Oven lights
will turn off automatically when the oven mode is
cancelled.
The lights do not operate in the Self-Clean mode.
To manually control the interior oven lights in
either the upper or lower oven if one or both ovens
are in use:
1. Touch [UPPER/LOWER] and the display will
indicate which oven is selected.
2. Touch [UPPER/LOWER] to
select
the other
oven.
3. Touch [LIGHT] to turn lights on or off in the
desired cavity.
To move the cooking mode selector to Low Temp
modes, one of the following functions must be
displayed:
