Fulgor Milano FWC 8200 U TC, Instructions For Installation And Use Manual, Page: 36 / 96

EN
16
Handle Installation
1. Take out handle from cabinet, then take out 2pcs screws
from accessory bag
2. Pull open door seal from the side of door, then insert
screws into the 2 handle holes on side of door, then put
the screws alignment the hole of handle , tighten the
screws by Phillips screwdriver, then compress the door
seal.
If the screws holes of the handle don’t match perfectly with
the holes of the door ,please use the electric drill to drill
the holes of the door a bit big ( in surface side), in order to
install the handle perfectly .
Ventilation frame Installation Method
(mod. 82cm)
1. Take out Ventilation frame from cabinet, then take out 4
pcs 4*12 screws from accessory bag.
2. Open the door, align the ventilation frame to the four
screw holes in the bottom of the cabinet and tighten the
screw with Phillips screwdriver.
OPERATION ANOMALIES
Ensure that there is power to the electrical supply plug by
connecting another electrical appliance to it. Check fuse, if
any. Make sure that the door is closed properly.
If your wine cellar appears to be malfunctioning, unplug
it and contact your after sales service. Any intervention
on the cold circuit should be performed by a refrigeration
technician who should carry out an inspection of the circuit
sealing system. Similarly, any intervention on the electrical
circuit should be performed by a qualified electrician.
Notes: Any intervention performed by a non- authorized
technician We will lead to the warranty being
considered as null and void.
POWER FAILURES
In the event of a power interruption, all previous temperature
settings are automatically preservation and it will revert to a
preset temperature setting. (See preset chart)
Most power failures are corrected within a short period
of time. An hour or two’s loss of power will not affect
wine cellar’s temperatures. To avoid sudden change of
temperature while the power is off, you should avoid
opening the door. For longer period of power failure, do
take steps to protect your wine.
Irrespective of the cause, if you notice either
abnormal temperature or humidity levels inside
your wine cellar, be reassured that only long and
frequent exposure to these abnormal conditions
can cause a detrimental effect on your wines.