Fulgor Milano F7IBM36O1-L, User Manual, Page: 43 / 128

43
EN
> In case of anomalities, touch the button Alarm and the display will show the anomaly message with
its error number code.
> The message will be shown for 3 seconds, then it will go back to the home screen.
> For blocking the message on the screen, press on the display, the button info ( ). The message will be on
the screen for 30 seconds, then it will go back to the home screen.
> I n the case there is more than one error message, the dispay will show in time sequence the different
anomalies messages.
11.2 Malfunction messages appearing on the display
Display message Malfunction description
Power Failure!!
Prolonged interruption of electrical power
the appliance resumes work automatically, the display shows the warmest
temperatures achieved
Door Fridge OPEN
Fridge door open
the message appears after few minutes from the door opening
Fresh Zone OPEN
Freezer door open
the message appears after few minutes from the door opening
Replace filter
Replace filter cartridge
message appears when only 30% of filter capacity is left
Fridge too warm
Fridge too warm
see Troubleshooting Guide
Fridge too cold
Fridge too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Fresco too warm
Fresco Compartment too warm
see Troubleshooting Guide
Fresco too cold
Fresco Compartment too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Fresh Zone too warm
Freezer too warm
see Troubleshooting Guide
Fresh Zone too cold
Freezer too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Error Code...
Functional problems
call Customer Care who may help you to salve the problem or put you in
contact with the nearest Service Agent
Check condenser
Check Condenser
Every 6 months the display shows the message “Check Cond”, clean the
condenser and press for 5 seconds the Enter button to reset.