Fulgor Milano F7IBM36O1-L, User Manual, Page: 40 / 128

40
EN
Upper condenser.
For cleaning the condenser follow the
instructions:
> Switch off the appliance by pressing the Unit
button on the main control panel for approx
3 seconds.
> Wait approx 30 minutes, until the finned
condenser cools down to room temperature.
> Lifting up the removable grille.
>
Clean it thoroughly from any dust build up as
shown in the picture, taking care not to damage it.
> Restart the unit pressing for 3 seconds on the on
button .
Warning
The edges of the condenser are sharp,
therefore use adequate protection for the
hands and arms when cleaning the con-
denser.
10.3 Cleaning of the ventilation grille,
filter and condenser
The unit requires, for a correct operation, the
cleaning of the ventilation grille, filter and
condenser.
The recurring clenaning every 6 months is remin-
ded by an acoustic and optical signal on the dispaly.
It is possible to disable the warning signal and see
the time left before the next cleaning has to be done.
Behind the frontal ventilation grille there is the con-
denser.
To clean it use a vacuum cleaner with a soft brush
attachment at maximum power, sweeping it along
the vent slits. In case of a significant dust build up,
the ventilation grille can be removed to allow a more
accurate cleaning of the filter.
On the mantenience settings,
MAINTENANCE
after the
installation of the unit and after it has been turned
on, you can set the condenser cleaning warning.
In the case the warning sign will be enable, there
will be an acoustic signal every 6 months, that
informs that is time to clean the condenser.
After cleaning it, touch the reset icon in order
to reactivate the warning signal in 6 months.
In the case you do not want the warning cleaning
signal of the condenser anymore, touch the off icon.
10. CARE AND CLEANING