Fulcrum Torbal DRX-4, Instruction Manual

Page: 14 / 30

9
5. When finished re-zeroing, the scale will return to Weighing Mode and the
display will indicate 0. A new center of zero has been set, and the scale is
ready for weighing.
Taring
Display in the
Weighing Mode
after it has been
re-zeroed
1. If a container is used for weighing, it may be tared. In taring the container,
the scale subtracts the weight of the container from the gross weight to
obtain the net weight.
2.
To tare the weighing container, place it in the middle of the pan. The
container’s weight will be shown on the display, i.e.:
Note: Re-zeroing the scale will reduce the capacity of the scale by the re-
zeroed weight. The remaining capacity is displayed as a percentage on the
right side of the display.
Display indicating
the weight of the
container
I n s t r u c t i o n M a n u a l M o d e l D R X - 4
C H A P T E R 8