TECHNICAL MANUAL - OFF ROAD
MAINTENANCE SHEETS FOR OFF-ROAD WHEELS
UNIT
TYPE
OPERATION
REVISION
DESCRIPTION
OFF-ROAD WHEELS
DISC BRAKE
INDUSTRIAL BEARINGS/CONES-BOTTOM
BRACKET CUPS
008
01- 11 /2016
DISASSEMBLY AND REFITTING OF THE FREE
WHEEL BODY
PRODUCTS ON WHICH TO APPLY THE PROCEDURE
RED POWER
(2015)
RED POWER HP
(2015)
RED POWER C23 / HP / BOOST
RED PASSION / RED PASSION 3 /
BOOST
6
On the left side, remove the external adapter. It is not
necessary to remove the QR adapter (if this is fitted).
Block the pivot on the left side, using a 14mm cone
wrench.
Loosen the right-hand adapter, using a 17mm wrench.
Pay attention to the left-hand thread!
Remove the adapter and the spacer (if fitted).
Remove the FW body from the hub pivot.
Grease the inside of the rack insert with lithium grease.
the quantity of grease inserted should cover about 75%
of the free space of the rack insert.
If necessary, grease the inside of the FW body pawls
as well.
Insert the FW body on the pivot.
Using a screwdriver, move the pawls into the closed
position and, slowly rotating the FW body, insert them
in the rack.
7
3
4
9
5
1
2
8
