FUKUDA DENSHI FX-8400
Tango M2 Interface Notes
To setup Tango M2 with the FX-8400, simply follow the directions below.
1. Verify Correct RS-232 and ECG Trigger Cables
l
RS-232 Cable
– used to communicate with the FX-8400. This cable enables the FX-8400 to prompt
Tango M2 when it needs a BP measurement, and allows the Tango M2 BP reading to be transferred
to the FX-8400 display and reports.
o SunTech Part Number = 91-0010-01 or (FUKUDA DENSHI Part Number CJS-03DA5)
o Connection Ends:
FX-8400 Connection
Tango M2 Connection
Mini DIN 8pin male
D-sub 9 pin female
l
ECG Trigger Cable
– provides the ECG signal from the FX-8400 to the Tango M2.
o SunTech Part Number = 91-0018-02 or (FUKUDA DENSHI Part Number CJS-02JB5)
o Connection Ends:
FX-8400 Connection
Tango M2 Connection
1/8” phono plug
BNC male
