Parts List
43
1
• Power Cord :
A 3-pin cable to connect the XG2000CR to a power supply.
WARNING
• The power cords provided with the device are for exclusive use for USA and Can-
ada.
• Power cord must meet the requirements of the country where you use this product.
• Serial cross cable :
A cable to connect the XG2000CR to a PC when the settings
need to be adjusted.
• Hardware Guide :
A manual describing the XG2000CR hardware and related
matters (this manual).
• Rack Mounting Bracket :
Brackets for mounting the XG2000CR in a rack. Attach each
rack mounting bracket to the right and left sides of the
XG2000CR, and fasten to the rack posts with the rack screws
(large).
• Rack Mounting Bracket B :
A bracket for mounting the XG2000CR in a rack. Attach the
rack mounting bracket B to the back-right and back-left sides of
the XG2000CR, and fasten to the rail (attached to the back-
right rack post) with the rack screws (small).
• Rail R :
A rail that is attached to the back-right rack post and into which
the back rack mounting bracket is slid and fastened when
mounting the XG2000CR in a rack.
• Rail L :
A rail that is attached to the back-left rack post and into which
the back rack mounting bracket is slid and fastened when
mounting the XG2000CR in a rack.
• Rack Nut :
When the rack post holes are round, use the rack nuts to fas-
ten the XG2000CR to the rails and rack posts using the rack
screws (large).
• Cage Nut :
When the rack post holes are square, use the rack nuts to fas-
ten the XG2000CR to the rails and rack posts using the rack
screws (large).
• Rack Screw (Small) :
Flat-head screws for fastening the rack mounting brackets to
the rack mounting bracket B.
• Rack Screw (Large) :
Pan-head screws for fastening the XG2000CR to the rails of
the rack posts.
• License Agreement :
The document describing End-User Licence Agreement.
