Fujitsu UTY-RNRUZ2, Operating Manual

Page: 9 / 26

Notes
• The Operation button cannot be operated at screens
other than the Monitor Mode Screen.
• Depending on the occupied state and the indoor unit op-
eration state, the operation button needs to be pressed
twice. Refer to [4 OPERATION TIPS] → [4-5 Occupied
state].
2-2 Operation Settings
2-2-1 Set the Operation Mode
(1) Touch the [Mode] on the monitor mode screen.
(2) “Mode” screen is displayed. Select the operation mode.
(1) (2)
76°F
80°F
74°F
84°F
68°F
Custom
Auto
Auto
Cool
Heat
Set Temp. Mode
Menu Status Vacation
Fan
Fri 10:00AM
Room Temp.
Cool
Heat
Away
Occupied
Mode
Cancel
Cool Dry Heat
Fan
OK
Custom
Auto
Notes
• Only selectable modes are displayed. The selectable
modes may be different depending on the system con-
figuration and operation status. Refer to [4.OPERATION
TIPS]→[4-1 Selectable modes].
• When the “Fan” is selected, the
temperature cannot be set.
76°F
84°F
68°F
Auto Fan
Set Temp. Mode
Menu Status Vacation
Fan
Fri 10:00AM
Room Temp. Cool
Heat
Away
Occupied
• The mode cannot be changed during Away operation.
Select the occupied state.
• [Custom Auto] mode can be used in the R.C. Group
to which Master Indoor Unit is set. It is not displayed
at other R.C. Group. It is not displayed at other indoor
units.
• When the following settings are not performed together,
[Custom Auto] cannot be used.
R.C. Sensor Setting: Used.
Refer to [3 SETTING] → [3-8 Initial Setting] → [3-8-5
R.C. Sensor Setting].
Master Indoor Unit Setting: Master Indoor Unit
For installer. Consult authorized service personnel.
• When the operation mode is switched in a heat recovery
system, operation preparations may take some time, but
this is not a malfunction.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
2-2-2 Set the Temperature
(1) Touch the [Set Temp.] on the
monitor mode screen.
76°F
80°F
74°F
84°F
68°F
Custom
Auto
Auto
Cool
Heat
Set Temp. Mode
Menu Status Vacation
Fan
Fri 10:00AM
Room Temp. Cool
Heat
Away
Occupied
(2) “Set Temp.” screen is displayed. Adjust the room tem-
perature with the [ ] or [ ].
Custom Auto mode
Cool, Dry or Heat mode
74 80
°F °F
Set Temp.
Cancel OK
Heat Cool
80
°F
Set Temp.
Cancel OK
Notes
• The settable temperature range is different depend-
ing on the operation mode. Refer to [4 OPERATION
TIPS]→[4-3 Selectable Temperature Range].
• When the “Set Temp. Range Setting” is set, the select-
able temperature conforms to the setting. Refer to [3
SETTING] → [3-5 Special Setting] → [3-5-3 Set Temp.
Range Setting].
• During Away operation, the temperature cannot be set.
Select the occupied state.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
2-2-3 Set the Fan Speed
(1) Touch the [Fan] on the monitor mode screen.
(2) “Fan” screen is displayed. Select the fan speed with the
[ ] or [ ].
(1) (2)
76°F
80°F
74°F
84°F
68°F
Custom
Auto
Auto
Cool
Heat
Set Temp. Mode
Menu Status Vacation
Fan
Fri 10:00AM
Room Temp.
Cool
Heat
Away
Occupied
Fan
Cancel OK
Auto
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
En-7
En-8