Fujitsu UTY-LNHUM Operating Manual Download Page 3

En-2

FEATURES AND FUNCTIONS

ECONOMY OPERATION

Limits the maximum operation current, and performs operation 

with the power consumption suppressed. When economy opera-

tion mode is operated, the room temperature will be little higher 

than the set-temp under cooling mode and lower than set-temp 

under heating mode. Therefore, the economy mode is able to 
save more energy than other normal mode.

AUTO CHANGEOVER

The operation mode (cooling, dry, heating) is switched automati-

cally to maintain the set temperature, and the temperature is kept 
constant at all times.

MINIMUM HEAT OPERATION

The room temperature can be set to go no longer than 50°F, 

thus ensuring that the room does not get too cold when no oc-
cupied. 

PROGRAM TIMER

The program timer allows you to integrate OFF timer and ON 

timer operations in a single sequence. The sequence can involve 

1 transition from OFF timer to ON timer, or from ON timer to OFF 
timer, within 24 hour period.

SLEEP TIMER

When the “SLEEP” button is pressed during Heating mode, the 

air conditioner’s temperature setting is gradually lowered during 

the period of operation; during cooling mode, the temperature 

setting is gradually raised during the period of operation. When 
the set time is reached, the unit automatically turns off.

WIRELESS REMOTE CONTROLLER

The Wireless Remote Controller allows convenient control of air 
conditioner operation.

HORIZONTAL AIRFLOW: COOLING/
DOWNWARD AIRFLOW: HEATING

For cooling, use horizontal air

fl

 ow so the cool air does not blow 

directly on the occupants in the room. For heating, use down-
ward air

fl

 ow to send powerful, warm air to the 

fl

 oor and create 

a comfortable environment.

OMNI-DIRECTIONAL AIR FLOW 
(SWING OPERATION)

3-dimensional control over air direction swing is possible through 
dual use of both an UP/DOWN air direction swing and RIGHT/
LEFT air direction swing. Since UP/DOWN air direction 

fl

 aps 

operate automatically according to the operating mode of the unit, 
it is possible to set air direction based on the operating mode.

IMPORTANCE

You can use both wired and wireless remote controller simul-
taneously. But function is limited.
[The restricted functions for wireless remote controller ones]
 • SLEEP TIMER

 • TIMER
 • MINIMUM HEAT OPERATION

9374136131-02_OM.indb   2

9374136131-02_OM.indb   2

24/9/2553   15:18:47

24/9/2553   15:18:47

Summary of Contents for UTY-LNHUM

















Reviews: