Fujitsu TeamPoS 3000 XL, Installation & Maintenance Manual

Page: 150 / 252

TeamPoS 3000 XL and XL
2
Maintenance
D900000145 Issue 3 7-17
5.
Press firmly to make the connection.
6.
Reinstall the front panel (See Section 5.1.1).
7.
If this is an upgrade, install the upgrade label that comes with the upgrade kit to the side of
the unit near the serial number. (See Section 7.2).
7.5 Adding or Replacing Memory
Caution: Be sure to observe all ESD precautions and power off procedures.
7.5.1 Adding or Replacing XL Motherboard Memory
The TeamPoS 3000 XL Motherboard has two memory sockets or slots and can use 256MB,
512MB or 1GB DDR memory in combination.
1. Remove the rear panel (See Section 5.1.2).
2. Disconnect the power cable from the controller.
3. Remove the front panel (See Section 5.1.1), and the yellow LED should be off. (See
Section 1.2).
4. Remove the motherboard assembly (See Section 5.2).