Fujitsu T936 Operating Manual Download Page 55

Page: 55 / 122

Working with the notebook

Removing a SIM card

►

Remove the rechargeable battery, see

"Removing a battery", Page 46

►

Remove the SIM card carrier from
its location (1).

►

Remove the SIM card from the SIM
card carrier (2).

►

Push the SIM card carrier back into
its location (3).

►

Install the rechargeable battery again, see

"Installing a battery", Page 48

Optional wireless LAN / Bluetooth / 4G
wireless components

The installation of radio components not approved by Fujitsu will invalidate
the certi

cations issued for this device.

Depending on the system con

guration ordered, your system will be equipped

with wireless LAN, Bluetooth and / or 4G.

Switching the wireless components on and off

►

Press the key combination

to switch the wireless components on and off.

WirelessLAN

Bluetooth

The wireless component indicator will illuminate when one or more wireless
components are switched on.

The Bluetooth 4G modules and the wireless LAN transmission unit (antenna) will
all be switched off when you switch off the wireless components.

Pay attention to the additional safety notes for devices with wireless components
provided in the "Safety/Regulations" manual.

Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.

You can obtain more information on 4G from your service provider.

Fujitsu

Summary of Contents for T936



























































































































Search results

Summary of Contents for T936

Reviews:

Related manuals for T936

Brands by name

Popular brands

Fujitsu T936, Operating Manual

Search results

Summary of Contents for T936

Reviews:

Related manuals for T936

Brands by name

Popular brands