Fujitsu STYLISTIC Q775 Operating Manual Download Page 22

Page: 22 / 136

First-time setup of your device

Mounting the feet (only device versions
with hand vein sensor)

Feet

Before initial startup of the above-mentioned device versions, Fujitsu recommends
that you mount the supplied feet.

►

For how to install the feet, see section

"Using the palm vein sensor (device-dependent)", Page 71

Connecting the AC adapter

Makingreadytouse

ACadapter

Observe the safety notes in the enclosed "Safety/Regulations" manual.

The supplied AC cable conforms to the requirements of the country in which
you purchased your device. Make sure that the AC cable is approved for
use in the country in which you intend to use it.

►

Connect the AC cable (1) to the AC adapter.

►

Plug the AC cable (2) into a power outlet.

►

Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.

Fujitsu

Summary of Contents for STYLISTIC Q775









































































































































Search results

Summary of Contents for STYLISTIC Q775

Reviews:

Related manuals for STYLISTIC Q775

Brands by name

Popular brands

Fujitsu STYLISTIC Q775, Operating Manual

Search results

Summary of Contents for STYLISTIC Q775

Reviews:

Related manuals for STYLISTIC Q775

Brands by name

Popular brands