Chapter 4
Connecting the Domain to the Network
4-7
7. Type the
fmdump
command or the
showlogs error
command at the XSCF
Shell.
8. Confirm that no errors are displayed in the XSCF console after using the
fmdump
or the
showlogs error
commands.
If an error is displayed, see
Section B.3, “Using Status Commands” on page B-3
9. Type the
poweroff -d 0
command at the XSCF shell to power off the system.
10. Set the mode switch on the operator panel back to Locked, and hand the key to
the system administrator.
XSCF> poweroff -d 0
Summary of Contents for SPARC Enterprise M3000
