Fujitsu SERVIS IP-KVM User Manual Download Page 156

Page: 156 / 174

5.1 Troubleshooting

5.1. Troubleshooting

This section provides examples of possible problems and methods for solving while
using this product.

5.1.1 LED

Confirmation

Did you check LEDs at front/rear of this product?

roubleshoot

ing

Check LEDs at front/rear of this product if trouble occurs. By using LEDs, it is
possible to monitor power supplies and network problems.

Refer to

1.3.1 Rear (page

Refer to

1.3.2 Front

(page 6)

Section

LED Status

Problem

Solving

5.1.2 Cannot

Power On the Device

Is the power adapter connected?

Make sure to use the provided power adapter.

Is power being supplied to the outlet?

1 Power

LED

Off

Power adapter might be disconnected.
Connect the power adapter.

2 Ethernet

Link LED

Off

Ethernet port link is not established.
Check the connection with network devices such
as router and hubs etc.

3 Ethernet

Off

This LED blinks when network access to this
product is occurred.

Act LED

If access failure occurs, the LED turns off.

SERVIS IP-KVM

1p Converter

User’s Guide

144

Summary of Contents for SERVIS IP-KVM















































































































































































Search results

Summary of Contents for SERVIS IP-KVM

Reviews:

Related manuals for SERVIS IP-KVM

Brands by name

Popular brands

Fujitsu SERVIS IP-KVM, User Manual

Search results

Summary of Contents for SERVIS IP-KVM

Reviews:

Related manuals for SERVIS IP-KVM

Brands by name

Popular brands