manualshive.com logo in svg

Fujitsu ServerView Event Manager, User Manual, Page: 57 / 172

Share
Download
Fujitsu ServerView Event Manager User Manual Download Page 57

ServerView Event Manager

 57

Mail forwarding in general

4.4

Mail forwarding in general

Points to note when setting up the mail service (MAPI)

To configure the mail service, check whether Microsoft Mail is installed.

If the Microsoft mail system is not installed, you will need to run the setup 
program of your operating system again to install the mail system.

For more information see the Readme files, which are located in the installation 
directory of ServerView.

The Readme files are located 

– on Windows in:

<wwwroot>/ServerView/common/readme.txt 

– on Linux in:

/usr/share/doc/fujitsu/ServerViewSuite/en/README

or

/usr/share/doc/fujitsuServerViewSuite/jp//README

Making mail settings

If you have selected 

Mail

 for the forwarding, the following 

New Mail Configuration

 

window opens.

Summary of Contents for ServerView Event Manager













































































































































































Reviews:

No comments