manualshive.com logo in svg

Fujitsu ServerView Event Manager, User Manual, Page: 151 / 172

Share
Download
Fujitsu ServerView Event Manager User Manual Download Page 151

ServerView Event Manager

 151

Trap overview

tapeAlertTrap39

39

The tape drive may have a 
hardware fault. Run 
extended diagnostics to 
verify and diagnose the 
problem. Check the tape 
drive users manual for 
device specific instructions 
on running extended 
diagnostic tests.

minor

tapeAlertTrap40

40

The changer mechanism is 
having difficulty 
communicating with the 
tape drive:

1. Turn the autoloader off 

then on.

2. Restart the operation.
3. If problem persists, call 

the tape drive supplier 
helpline.

critical

tapeAlertTrap41

41

A tape has been left in the 
autoloader by a previous 
hardware fault:

1. Insert an empty 

magazine to clear the 
fault.

2. If the fault does not 

clear, turn the 
autoloader off and then 
on again.

3. If the problem persists, 

call the tape drive 
supplier helpline.

critical

tapeAlertTrap42

42

There is a problem with the 
autoloader mechanism.

minor

Trap name

 ID

Meaning

Error class

Table 44: Tape traps

Summary of Contents for ServerView Event Manager













































































































































































Reviews:

No comments