manualshive.com logo in svg

Fujitsu SE300, Operating Manual

Share
Download
Fujitsu SE300 Operating Manual Download Page 68

Switching the SE300 on and off

Switching the server on and off

68

 

 U41858-J-Z126-1-76

3. Switch on the Server Unit

Before the Server Unit is switched on, the status indicator lights up orange.

Ê

Switch on the Server Unit by pressing the On/Off switch.

The power-on indicator lights up green. The Server Unit switches on, conducts a 
system test and starts X2000.

If automatic IPL is configured for BS2000, the BS2000 system (Native or as a VM2000 
monitor system) is also started with the configured settings.

If automatic startup is configured for XenVMs, these systems are also started.

i

    The controls and indicators of the Server Unit are described in the "Server Unit 

x86" Operating Manual [

3

]. 

Further optional Server Units are switched on in the same way. 

4. Switch on the optional Application Units 

Before an Application Unit is switched on, the status indicator lights up orange (POWER 
STAND-BY).

Ê

Switch on the Application Unit by pressing the On/Off switch.

The power-on indicator lights up green. The Application Unit switches on, conducts a 
system test and starts the operating system.

i

    The controls, indicators and further on/off options for the AU are described in the 

"Additive Components" Operating Manual [

4

]. 

Further optional Application Units are switched on in the same way. 

Summary of Contents for SE300























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands