Parts and Functions
This section explains the names and functions of the ScanSnap parts.
Front
3
1
2
5
4
6
No.
Name
Description
1
ADF paper chute (cover) (*1)
Open it to use the ScanSnap.
Opening it turns on the ScanSnap. Then, you can load a document
on it.
2
ADF top section
Open it to remove jammed documents, replace the Roller Set, or
clean the inside of the ScanSnap.
3
Extension
Pull out when scanning long documents.
4
Side guide
Adjust to the width of documents to prevent them from getting
skewed.
5
ADF release tab
Pull this tab to open the ADF top section.
6
[Scan] button (*1)
Starts scanning.
Indicates the status of the ScanSnap as follows:
Blue (lit): Ready
Blue (flashing): Scanning
Orange (flashing): Error
*1: When the ScanSnap has turned off automatically because of the automatic power off function,
either press the [Scan] button (this will not start scanning), or close the ADF paper chute (cover),
then open it again to turn the ScanSnap back on.
For details, refer to
"Automatic Power OFF" (page 47)
Parts and Functions
32
