ATTENTION
Lifting the retaining clip with your fingernail may hurt or damage your fingernail.
Use a paper clip or something alike if you have trouble lifting it up.
8.
Attach the new pick roller assembly to the shaft.
Insert the drive pin of the shaft into the slot of the pick roller assembly.
Pick Roller Assembly
Drive Pin
Shaft
9.
Attach the shaft to the ScanSnap.
Insert the right end of the shaft into the bushing on the right side, and then slowly attach the left
end of the shaft into place.
Pick Roller Assembly
Shaft
10.
Secure the bushing on the left.
Replacing Consumables
110
