Fujitsu SCALEO EV, User Manual

Page: 134 / 343

Troubleshooting (FAQ)
58
6 Troubleshooting (FAQ)
There are two general types of error message:
•
Software error messages
• System error messages
6.1 Software error messages
Software error messages are displayed on the screen by the operating system or an
application. These messages generally appear after you have started the operating
system or when you run an application. If this type of error message appears, refer
to the manual for the respective application or the operating system to find out how
to resolve this error.
6.2 System error messages
A system error message indicates a computer problem
The following checklist describes how you can eliminate small problems yourself. In
the event of serious defects, you may have to contact your dealer or the hotline.
Please refer to the relevant sections of the service documents supplied.
The computer will not start
Your mains socket may be faulty. Check whether the mains socket is working by
connecting another electrical appliance, e.g. a table lamp.
Your SCALEO EV may not be connected to the power socket/plug strip.
To isolate the SCALEO EV, disconnect the mains plug. Check all the connections,
reconnect to the mains and switch on the SCALEO EV again.
Nothing appears on the TV/monitor
Make sure that the TV/monitor is switched on.
Check that the SCALEO EV and the TV/monitor are correctly connected.
Consult the TV/monitor documentation to determine which connections can be used
for the Video IN signal (e.g. S-Video IN or Composite IN).
Are you using a screen saver? Press the "Shift" key to restore the display.
Are you using the automatic power-saving function? These functions switch the
SCALEO EV to power-saving mode. Press any key or move the trackball to leave
this mode.
With the SLEEP key, you have switched the SCALEO EV into the AWAY mode.
Press the AWAY key to reactivate the SCALEO EV.
Set the contrast and brightness of the TV/monitor.
Check the cable connection between the TV/monitor and the SCALEO EV.