En-11
7.2. Installing the remote control unit holder
CAUTION
Check that the indoor unit correctly receives the signal
•
from the remote control unit, then install the remote
control unit holder.
Select the remote control unit holder selection site by
•
paying careful attention to the following: Avoid places in
direct sunlight. Select a place that will not be affected by
the heat from a stove, etc.
Install the remote control unit with a distance of 7 m be-
•
tween the remote control unit and the photocell as the
criteria. However, when installing the remote control unit,
check that it operates positively.
Install the remote control unit holder to a wall, pillar, etc.,
•
with the tapping screw.
Mount the holder.
(1)
Screws
Set the remote control unit.
(2)
Insert
Press in
To remove the remote control unit (when use at hand).
(3)
Slide up
Pull out
8. DECORATION PANEL INSTALLATION
Installation according to the Installation instruction sheet
•
Decoration panel.
Be sure to con
fi
rm there is no gap between the panel and
•
main unit after installing the Decoration panel.
8.1. Remove the intake grille
Slide the 2 grille hook.
(1)
Grille hook
Open the intake grille and remove.
(2)
