B
System configurator and order-information guide
PRIMECENTER Rack
PRIMERGY TX200 S7 Status 2014-01-30
S26361-F2735-E285
S26361-F2735-E111
Rack Mount Kit F2-C S7 LV
RMK-F2_DI_CMA_QRL_LV
No Rackmount-Kit option
length variable (559mm- 860mm)
telescopic drop-in rail, full extr.
Only for loose deliveries
for loose delivery
1-hand-mounting
No mounting in racks possible
with CMA adapter
RMK - 1 pair consisting of
max. 1x per system
S26361-F2735-L285
- vario carrier length variable
without CMA adapter
with quick release lever support
S26361-F2735-L286
- telescopic drop-in rails
with CMA adapter
Sideways cable management arm
1x per system
C
for mounting in asymmetrical FJ racks.
Has to be mounted above the RMK.
S26361-F2735-L7
S26361-F4530-E12
S26361-F4530-E10
Support bracket 3U S26361-F2735-L31
Mounting systems higher 3U in
Mounting in
has to be ordered for loose delivery
asymmetrical
racks
symmetrical
racks
S26361-F2735-L31
with 3U support bracket
(no support bracket needed)
S26361-F2735-E71
S26361-F2735-E82
Cable Management Arm (CMA) can
Lateral cable management
2U cable management arm (CMA)
only be used for FTS RMKs with
for 2U servers or higher
for 2U server or higher
CMA adapter
- for asymmetrical racks
- for symmetrical racks
PRIMECENTER S2 or M1
M1 or 3rd party racks
S26361-F2735-L82
- 1 bracket PC Rack asym.
Fujitsu racks
Cable management arm for 2U Server
1x per system
1x per system
or higher for loose delivery
can only be mounted at RMK with
CMA adapter
for loose delivery
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered
"Rack-mounting ex factory"
completely pre-mounted and
This service is to be ordered once
all wired connections are tested.
per installable server/storage
With PCR S2 12U, 24U, 38U and
subsystem, in order to get the
PRC M1 16U, 24U, 42U:
server/storage subsystem
Systems and components
mounted into the racks.
will be delivered installed in the rack
In case of the 46 U PCR S2
With PCR S2 racks 46U:
this service has to be ordered,
Systems and components
to get the mounting kits and the
will be delivered separately
cables installed.
To be ordered only together with
a PRIMECENTER rack
PCR S2 e.g. S26361-K826-V10x
new PCR M1 e.g. S26361-K827-Vxxx
refer PCR S2 or M1 rack configurator
max. 1x per System
PRIMERGY Classic 19" rack is not supported
For later conversion the following kits are available:
1.) Conversion kit 2 Floor -> Rack
S26361-F1729-L260
Conversion PRIMERGY TX200 S7 base unit floorstand into
base unit rack. Only conversion, no mounting kit.
Mounting kit has to be ordered seperatly.
C
Fujitsu PRIMERGY Server
9 of 28