System configurator and order-information guide
PRIMERGY TX200 S7 Status 2014-01-30
C
1x mandatory for redundant base units
there is only 1 PSU type allowed (450W or 800W)
*For order completeness only
Will be added automaticly with
S26113-F575-E10
S26113-F574-E10
System Architect Version ≥ V9.3
2x
Power supply 450W
Power supply 800W
(hot plug)
(hot plug)
For redundant Base Units only
occupies one bay for
occupies one bay for
(V201, V401, V601 and V801)
hot plug power supply
hot plug power supply
max. 2x per system
max. 2x per system
For redundant floorstand versions only
(V201 and V401)
A second, redundant power supply requires an additional
country specific power cord (section XIII)
For later upgrades the following kits are available:
1 power supply module 450W hot plug:
S26113-F575-L10
Supplementary module
1 power supply module 800W hot plug:
S26113-F574-L10
Supplementary module
Attention: There is no power cable included!
Std to Redundant Upgrade Kit
S26361-F3699-L1
consisting of a redundant PSU cage and backplane
AND a 4th fan for fan redundancy
Does not contain any PSU module
Section
II
Processor
There are 2 processor sockets available.
The first socket is always equipped with the
first CPU
which can be selected via configurator
It is also possible to upgrade a dual-processor system later on with a
second CPU
Two processors with different clock frequencies are not possible
A multi-processor operating system is required for a dual-processor system.
Max. two CPU`s can be selected per basic unit
Note: Max. DDR3 Bus Speed depends on:
One of following CPU´s has to be selected as first CPU
- max. DDR3 Bus Speed from the CPU and
for an orderable basic unit
- max. DDR3 Memory Speed and
Optional second CPU has to be the same type like the first CPU
- max. memory modules on one memory channel
Basic 4C CPU's
- 1x 64-bit Intel Xeon (10MB shared TLC = Third Level Cache )
1066 MHz DDR3 Bus, 6,40 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2403 4C/4T 1.80GHz 10MB 6.40GT/s 1066MHz 80W
S26361-F3684-E180
Xeon E5-2407 4C/4T 2.20GHz 10MB 6.40GT/s 1066MHz 80W
S26361-F3684-E220
Standard Turbo 6C CPU's
- 1x 64-bit Intel Xeon (15MB shared TLC = Third Level Cache ); Hyper-Threading (HT);
1333 MHz DDR3 Bus, 7,20 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2420 6C/12T 1.90GHz 15MB 7.20GT/s 1333MHz 95W
S26361-F3723-E190
Xeon E5-2430 6C/12T 2.20GHz 15MB 7.20GT/s 1333MHz 95W
S26361-F3723-E220
Xeon E5-2440 6C/12T 2.40GHz 15MB 7.20GT/s 1333MHz 95W
S26361-F3723-E240
Advanced Turbo+ 8C CPU
- 1x 64-bit Intel Xeon (20MB shared TLC = Third Level Cache ); Hyper-Threading (HT);
1600 MHz DDR3 Bus, 8,00 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2450 8C/16T 2.10GHz 20MB 8.00GT/s 1600MHz 95W
S26361-F3724-E210
Xeon E5-2470 8C/16T 2.30GHz 20MB 8.00GT/s 1600MHz 95W
S26361-F3724-E230
Low Power 6C CPU
- 1x 64-bit Intel Xeon (15MB shared TLC = Third Level Cache ); Hyper-Threading (HT);
1333 MHz DDR3 Bus, 7,20 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2430L 6C/12T 2.00GHz 15MB 7.20GT/s 1333MHz 60W
S26361-F3725-E200
D
Fujitsu PRIMERGY Server
10 of 28