TX150 S5
Operating Manual
43
Hardware Installation
Installing/Removing the Rack Model
To install the left-hand rail in the PRIMECENTER/DataCenter Rack, the support
bracket supplied must first be mounted flush on the rear left support upright.
I
For better orientation the height units are marked on the support uprights
(PRIMECENTER Rack only).
Figure 7: Fitting the support bracket
Ê
Place the support bracket at the appropriate height on the left rear support
upright by inserting the positioning nub (n) in the corresponding hole of the
support upright.
Ê
Secure the bracket with two screws inc. plug washers.
No nuts are required to secure the telescopic rails as the fixing holes on the rails
are threaded.
