Fujitsu PRIMERGY TX1320 M4, Operating Manual

Page: 83 / 102

TX1320 M4
Operating Manual 83
Operation
Figure 29: Installing the cable clamp
Ê
Push the cable clamp into the corresponding hole until it clicks in.
Ê
If applicable, configure the redundant power supply.
6.5 Cleaning the server
V
CAUTION!
Switch off the server and disconnect the power plugs from the properly
grounded power outlets.
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server and the monitor are clear.
Do not use any cleaning sprays (including flammable types). It may
cause a device failure or a fire.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.