Fujitsu PRIMERGY SX910 S1, Operating Manual

Page: 43 / 46

SX910 S1
Operating Manual 43
5 Troubleshooting and tips
V
CAUTION!
Follow the safety instructions in chapter "Important notes" on page 15 .
If the power-on indicator of the storage blade (see figure 12 on page 37 )
remains dark after you have switched on the related server blade, follow these
instructions:
All information on troubleshooting faults that may occur when operating
server blades or storage blades in the PRIMERGY BX900 S1 system unit and
PRIMERGY BX400 S1 system unit are described in the operating manual for
the corresponding system unit.
If a fault occurs, try to correct it as described:
– in the chapter "Troubleshooting and tips" in the operating manual for your
system unit,
– in the chapters for the installed components,
– in the documentation for the connected devices,
– in the help systems of the individual programs used.
If you do not manage to correct the problem, proceed as follows:
Ê Make a note of the steps you have taken and the situation in which the fault
occurred. Also make a note of the error messages displayed.
Ê
Switch off the defective server blade or the system.
Ê
Contact customer service.