Fujitsu PRIMERGY SX910 S1, Operating Manual

Page: 10 / 46

10 Operating Manual
SX910 S1
Concept and target groups for this manual Introduction
Up to six PRIMERGY SX910 S1 storage blades can be installed in the
BX900 S1 system unit. Up to four PRIMERGY SX910 S1 storage blades can be
installed in the BX400 S1 system unit.
1.1 Concept and target groups for this manual
This operating manual shows you how to install the storage blade in the basic
unit, how to start up the storage blade and how to operate it.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY SX910 S1 storage blade into
operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.
1.2 Documentation overview
More information on your PRIMERGY SX910 S1 storage blade can be found in
the following documents:
– "Safety notes and regulations" manual
"
安全上のご注意
" for the Japanese market
– "Warranty" manual
"
保証書
" for the Japanese market
– "Returning used devices" manual and "Service Desk" leaflet
"
サポート＆サービス
" for the Japanese market
– “LTO-3 Half-Height SAS Tape Drive” manual
"
内蔵
LTO3
ユニット 取扱説明書
“ for the Japanese market
– “LTO-4 Half-Height SAS Tape Drive” manual
"
内蔵
LTO4
ユニット 取扱説明書
“ for the Japanese market
– “LTO-5 Half-Height SAS Tape Drive” manual
"
内蔵
LTO5
ユニット 取扱説明書
“ for the Japanese market