PRIMERGY SX05 S1
User Guide
19
3
Drive installation
A 3/16” (5mm) flat-blade screwdriver may be required to install a drive in the
PRIMERGY SX05 S1.
V
CAUTION!
●
To avoid damaging the equipment due to electrostatic discharge, be
sure to review and practice the procedures in Electrostatic discharge
before handling the drives.
It is necessary to stop all servers connected with the SAS drive
enclosure before work begins.
To install a drive:
Ê
Remove the top access panel as shown.
1. Unlock the lock lever (1).
2. Lift up the lock lever (2), the top access panel is slided to back side.
3. Remove the top access panel (3).
Figure 6: Removing the top access panel
Summary of Contents for PRIMERGY SX05 S1
