Fujitsu PRIMERGY SX05 S1, User Manual, Page: 13 / 52

PRIMERGY SX05 S1
User Guide 13
2 Introduction
The PRIMERGY SX05 S1 is a rack-mountable storage system capable of
holding up to two half-height 5.25 inch drives. It is compatible with most
standard 19 inch racks.
Figure 1: PRIMERGY SX05 S1
2.1 Standard features
The standard features of the PRIMERGY SX05 S1 are summarized below:
●
Supports one or two 5.25 inch half-height tape drives or RDX removable
hard drives
●
Installation in standard 19 inch racks with round, square, or threaded holes
I
Installation of the PRIMERGY SX05 S1 in PRIMERGY Racks is tested.
If there are questions concerning mounting the device in third party
19" racks, please consult the vendor of the rack.
2.2 Supported Controllers and HBAs
For up-to-date SAS HBA compatibility and information about cables, refer to the
PRIMERGY's website.