Fujitsu Primergy RX600 S2, User Manual

Page: 247 / 299

247
PRIMERGY RX600 S2 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd utili
ties
8.3.8 Server Menu
Settings for server are configured on the [Server] menu.
table: Items on the Server Menu
Item Settings Description
SM Error Halt • Enabled
• Disabled
（
initial value
）
Set whether or not to stop booting in case of System
management Error or Configuration Error.
ASR&R Set for booting control. Press the [Enter] key to display "8.3.9 ASR&R Submenu"
(
pg.248).
Console Redirection Set for console redirection. Press the [Enter] key to display "8.3.10 Console
Redirection Submenu" (
pg.249).
BMC Information BMC information is displayed. Press the [Enter] key to display "8.3.11 BMC
Information Submenu" (
pg.249).
LAN Management Set for onboard LAN. Press the [Enter] key to display "8.3.12 LAN Management
Submenu" (
pg.250).
SEL Logging Set for system event log. Press the [Enter] key to display "8.3.13 SEL Logging
Submenu" (
pg.250).
WOL Resume from S4-OS
and S5
• Enabled
（
initial value
）
• Disabled
Set whether or not to turn on via a network.
BIOS SETUP UTILITY
Server
Main Processor Memory Devices Server Security Save, Restore & Exit
Examine and set server management parameters.
SM Error Halt
> ASR&R
> Console Redirection
> BMC Information
> LAN Management
> SEL Logging
WOL Resume from S4-OS and S5
<Disabled>
<Enabled>
Enable pauses and displays SETUP enter or
resume boot pronpt If there is a System
Management error or configuration change
If Disable is selected, a warning messeage
Is displayed.
"+" = Next Value
"-" = Previous Value
Esc = Exit
F9 = Reset to Defaults
F10 = Save and Exit
<Enter> = Select Entry
= Move Highlight