250
Chapter 8 Configuring Hardware and Utilities
8.3.12 LAN Management Submenu
Settings for onboard LAN are configured on the [LAN Management] submenu.
8.3.13 SEL Logging Submenu
Settings for system event log are configured on the [SEL Logging] submenu.
table: Items on the LAN Management Submenu
Item
Settings
Description
Static IP Enable
• Enabled
• Disabled
(
initial value
)
Set whether or not to enable the static IP address
assignment. When “Enabled” is set, the follow-
ing items should be set.
Host IP Address
When setting "Static IP Enable" to "Enabled", set the host IP address.
Router IP Address
When setting "Static IP Enable" to "Enabled", set the router IP address.
NIC 1 MAC Address
The MAC address of the onboard LAN is displayed.
table: Items on the SEL Logging Submenu
Item
Settings
Description
Clear Log
• Enabled
• Disabled
(
initial value
)
Set whether or not to clear the event log.
Event Log Full Mode
• Maintain
• Overwrite
(
initial value
)
Set whether or not to overwrite the event log if the
area for the log is full.
Note:
When this setting is changed, existing event
log is cleared. Before changing, refer to "9.3
pg.271) and save the
log.
Summary of Contents for Primergy RX600 S2
