Fujitsu Primergy RX600 S2, User Manual

Page: 249 / 299

249
PRIMERGY RX600 S2 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd utili
ties
8.3.10 Console Redirection Submenu
Settings for console redirection are configured on the [Console Redirection] submenu.
8.3.11 BMC Information Submenu
The information on BMC (Baseboard Management Controller) is displayed.
table: Items on the Console Redirection Submenu
Item Settings Description
COM1 Console Redirection
Console Redirection • Enabled
• Disabled
（
initial
value
）
Set whether or not to enable the console
redirection.
Flow Control
• None
（
initial value
）
• RTS/CTS
• XON/XOFF
• RTS/CTS + CD
Set the flow control of console redirection.
Bit Rate • 9.6k
• 19.2k
（
initial value
）
• 38.4k
• 57.6k
• 115.2k
Set the bit rate.
Terminal Type • PC-ANSI
• VT100
• VT100+
（
initial
value
）
• VT-UTFB
Set the terminal type when using console
redirection.
table: Items on the BMC Information Menu
Item Description
Board Part Number The revision of BMC board is displayed.
Board Serial Number The serial number of BMC board is displayed.
System Part Number The parts number of the server is displayed.
System Serial Number The serial number of the server is displayed.
Chassis Part Number Nonuse
Chassis Serial Number Nonuse
BMC Device ID The device ID of BMC is displayed.
BMC Firmware Revision The firmware revision of BMC is displayed.
BMC Device Revision The device revision of BMC is displayed.
PIA Device ID The device ID of PIA is displayed.