manualshive.com logo in svg

Fujitsu Primergy RX600 S2, Operating Manual

Share
Download
Fujitsu Primergy RX600 S2 Operating Manual Download Page 7

A3C40069794

 

1

1

Introduction

The PRIMERGY RX600 S2 server is an Intel-based server for mid-size and 
large companies. The server is suitable for use as a file server and also as an 
application, information or Internet server. It is available as a rack model.

The PRIMERGY RX600 S2 server offers a high level of reliability and availability 
through highly developed hardware and software components. These include 
hot-plug hard disk drive modules, hot-plug system fans and power supply units, 
hot-plug PCI slots and memory boards, the 

ServerView

 server management 

software, “Prefailure Detection and Analysing” (PDA) and “Automatic Server 
Reconfiguration and Restart” (ASR&R).

Security functions in the 

BIOS Setup

 and on the system board protect the data 

on the server against manipulation. Additional security is provided by the 
lockable rack door.

This server occupies 4 height units (HU) in the rack.

1.1

Overview of the Documentation

I

PRIMERGY manuals are available in PDF format on the 

ServerBooks

 CD 

which is part of the 

PRIMERGY ServerView Suite

 delivered with each 

server system.

The PDF files for the manuals can also be downloaded free of charge 
from the Internet. The overview page showing the online documentation 
available on the Internet can be found via the URL:

http://manuals.fujitsu-siemens.com

 (choose: intel based servers).

Summary of Contents for Primergy RX600 S2


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands