58
A3C40069794
Switching the Server ON and OFF
Commissioning and Operation
©
c
o
gni
ta
s
. Ge
s
e
lls
c
h
ft
f
ü
r T
e
c
h
ni
k
-Do
k
u
m
ent
a
ti
o
n m
b
H
2
0
0
5
P
fad
: H
:\
G
S
\P
R
IM
E
R
G
Y
R
X
60
0 S
2
\B
A
\rx
6
00s
2u
s
\rx
6
00s
2u
s
.k
0
5
Switching the Server OFF (non ACPI-compatible Operating Systems)
Power-on indicator lights green (position 7 in figure 14 on page 45).
Ê
Shut down the operating in an orderly manner.
The server remains switched ON and the power-on indicator remains green.
Ê
Press the ON/OFF button (position 10 in figure 14 on page 45) or use one
of the possibilities described in “Other ON/OFF Possibilities” on page 58.
The server switches OFF and the power-on indicator is dark.
Other ON/OFF Possibilities
In addition to the ON/OFF button, the server can be switched ON and OFF in
the following ways:
–
Specified switch-On time/switch-OFF time
The server is automatically switched ON or OFF at a time specified in the
ServerView
program.
–
Ring indicator
The server is switched ON via an internal or external modem.
–
Wakeup On LAN (WOL)
The server is switched ON by a command via the LAN.
–
After power failure
The server automatically switches ON following a power failure (depending
of the settings in the BIOS).
–
Power override function
The system may be switched OFF "unconditionally" by pressing the ON/OFF
button for about 4 to 5 seconds.
V
CAUTION!
Data loss may occur!
–
IPMI
The server is switched ON by an IPMI console (via the serial COM1 port or
via the RJ45 LAN port).
