manualshive.com logo in svg

Fujitsu Primergy RX300 S3, User Manual, Page: 56 / 313

Share
Download
Fujitsu Primergy RX300 S3 User Manual Download Page 56

56

Chapter 3  OS Installation Using ServerStart

3.1 Guided Mode

In guided mode, follow the wizard to specify hardware configuration and the OS to be 
installed, save the information necessary for installation in a configuration file, and 
install the OS.

3.1.1 Starting Up the Guided Mode

Start up the guided mode.

1

Turn on the server and insert the ServerStart Disc1 CD-ROM immediately.

ServerStart starts up and a message prompts you to insert the ServerStart floppy disk.

2

Insert the ServerStart floppy disk supplied with the server. Make sure that 
"Removable media" and "A:" are selected and click [Create].

Set the ServerStart floppy disk in the write-enabled state.

The network setting window for remote installation appears.

Summary of Contents for Primergy RX300 S3


























































































































































































































































































































Reviews:

No comments