manualshive.com logo in svg

Fujitsu Primergy RX300 S3, User Manual, Page: 217 / 313

Share
Download
Fujitsu Primergy RX300 S3 User Manual Download Page 217

217

PRIMERGY RX300 S3 User's Guide

7

In

st

alling Internal 

O

ptions

7.8 Installing an Internal DVD-RAM 

Drive Unit

An internal DVD-RAM drive unit can be installed in this server by removing the CD-
ROM drive.

7.8.1 Installable Internal DVD-RAM Drive Unit

The following internal DVD-RAM drives can be installed.

7.8.2 How to Install the Internal DVD-RAM Drive Unit

1

Turn off the power to the server and all peripheral devices and remove the top 
cover.

"7.2 Installing/Removing the Top Cover" (pg.182)

2

Touch a metal part of the server to discharge static electricity.

• Before installing the DVD-RAM drive, turn off the server and all peripheral

devices, and unplug the power cables from the outlet. Failure to do so may
cause electric shock ( "1.4.3 Turning Off the Server" (pg.33)).

• The circuit boards and soldered parts of internal options are exposed and can

be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.

• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas

or the edges of the circuit boards.

table: List of Installable Internal DVD-RAM Drive Units

Product name

Model

Remarks

Internal DVD-RAM drive unit

PG-DVA102D

Summary of Contents for Primergy RX300 S3


























































































































































































































































































































Reviews:

No comments