manualshive.com logo in svg

Fujitsu PRIMERGY RX2510 M2, Operating Manual

Share
Download
Fujitsu PRIMERGY RX2510 M2 Operating Manual Download Page 48

48

Operating Manual

 RX2510 M2

Hardware installation

Connecting cables

Ê

Turn off all power and equipment switches.

Ê

Disconnect all power plugs from the properly grounded power outlets.

Ê

Connect all cables to the server and peripherals.

Ê

Plug all data communication cables into the utility sockets.

Ê

Plug all power cords into the properly grounded power outlets.

Disconnecting cables

Ê

Turn off all power and equipment switches.

Ê

Disconnect all power plugs from the properly grounded power outlets.

Ê

Unplug all data communication cables from the utility sockets.

Ê

Disconnect the relevant cables from the server and all the peripherals.

I

For connecting or disconnecting LAN cables, the server does not need 
to be powered off. To avoid loss of data teaming function has to be 
enabled.

Information for ensuring electromagnetic compatibility

All data and signal cables must have sufficient shielding. The use of cable type 
S/FTP Cat5 or higher is recommended. 
Use of unshielded or badly shielded cables may lead to increased emission of 
interference and/or reduced fault-tolerance of the device.

Summary of Contents for PRIMERGY RX2510 M2











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands