28
Options Guide
RX200
S3
Installing a second processor
Processors
Installing the heat sink
Figure 12: Installing the heat sink
Ê
Fit the heat sink on the processor such that the airflow arrow (1) is facing the
rear side of the server.
Ê
Attach the heat sink with four screws. Tighten the screws in diagonally
opposite sequence (2).
V
CAUTION!
Never install a processor without a heat sink! The processor is likely to
overheat, which may cause damage to the processor and the system
board.
Installing the air duct
Ê
Reinstall the air duct. Reattach the air duct. Ensure that the hooks on the air
duct (see
) engage on the fan’s rear panel.
Ê
Close the server, plug in the power plugs, and switch on the server as
described in the
chapter “Completion” on page 41
.
2
1
2
2
2
