Fujitsu PRIMERGY RX100 S6 Options Manual Download Page 12

Page: 12 / 76

Options Guide

RX100

Notational conventions

USB Flash Module (UFM)

The server can be equipped with a USB Flash Module (UFM).

This module can be used as optional memory for software (e.g. VMware) or as
a software dongle.

1.4

Notational conventions

The following notational conventions are used in this manual:

Text in italics

indicates commands or menu items.

"Quotation marks"

indicate names of chapters and terms that are being
emphasized.

describes activities that must be performed in the order
shown.

CAUTION!

pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.

indicates additional information, notes and tips.

Summary of Contents for PRIMERGY RX100 S6













































































Search results

Summary of Contents for PRIMERGY RX100 S6

Reviews:

Related manuals for PRIMERGY RX100 S6

Brands by name

Popular brands

Fujitsu PRIMERGY RX100 S6, Options Manual

Search results

Summary of Contents for PRIMERGY RX100 S6

Reviews:

Related manuals for PRIMERGY RX100 S6

Brands by name

Popular brands