Fujitsu PRIMERGY PG-R1CK7, User Manual, Page: 71 / 89

18 Conversion procedure
3
Remove the operator panel, CD-ROM(DVD-ROM) drive, all 5-inch inter-
nal devices and/or blank units from their bays.
Remove the components by holding the
latches pinched while pulling out the
device out of its bay (see diagram).
4
Orient the operator panel, CD-ROM(DVD-ROM) drive, all 5-inch internal
devices and/or blank units into their 5-inch bays.
POINT
Depending on the number of devices installed, there may not be
any blank units.
When installing these components, be careful not to pinch the
cables between the other components.
POINT
Depending on the number of devices installed, there may not be
any blank units.
Latches
[Front]