Fujitsu PRIMERGY PG-R1CK1, User Manual, Page: 70 / 79

10 Reinstalling the hard disk units 23
E
10 Reinstalling the hard disk units
Non hotpluggable type
1
Reinstall the hard disk units to the server.
Reinsert the hard disk units back into
their respective 3.5-inch storage bays as
shown in the diagram below.
2
Reconnect all hard disk unit cable connections.
In order to reconnect the hard disk cable connections, you must remove the left side
cover. After completing, reattach the cover. (Refer to "4 Removing the left side cover"
(pg 10), and "7 Reattaching the left side cover" (pg 15)).
3
Reattach the bay cover.
Press and hold the latches inward on
both sides of the bay cover and slide
inward until it clicks into place.
Be sure to reinstall the hard disk units back to their correct bays
from which they were removed.
Latches
Bay cover