Fujitsu PRIMERGY PG-R1CK1, User Manual, Page: 68 / 79

9 Installing the server in the rack cabinet 21
E
3
Attach the rail assembly to the rack cabinet.
This server requires 5U of cabinet space.
1
Fasten the brackets.
After deciding where to place the server (height) in the cabinet, fasten the
front brackets to the cabinet’s front rack support with the flathead screws (M6)
in the rack’s 4th and 6th hole positions (counting up from the bracket’s base)
as shown in the diagram. Then fasten the rear brackets in a similar way except
using the screws (M6) and washers provided in this kit instead of the flathead
screws.
2
Attach the rack nuts provided.
Insert the rack nuts in the 3rd and 13th hole positions (counting from the bot-
tom) as shown in the diagram. When inserting the nuts, make sure to use the
ones provided with the kit (M5) as they have special catches to secure their
hole positions.
Make sure to use the rack nuts (M5) provided with the rack con-
version kit and not the ones used on the rack cabinet.
[Front]
M5 rack nuts
Washers
3rd
13th
4th
6th
M6 flathead
screws
M6 screws
[Rear]
Server bottom
as reference point
1st
6th